FYI
SOME TOOLS YOU MAY NEED IN THE TECH ROOM
You can put this kit together for a about $30 and keep it in the box you put your parts in. It may keep you from running back to your trailer or truck to get what you need to take the motor apart and help speed up the teching process for you and theTech-man.
3/16" Allen wrench cut with the end cut to 1/2" long to unbolt the carb and exhaust header
3/16" ball driver
Whatever you need to take your carb off the tank ie. screwdriver, Allen wrench etc.
Allen wrench or whatever it takes to get your Filter Adapter off
Flat blade screwdriver to remove the jet
A long flat blade screwdriver with a small end to take out the butterfly screw
1/2 " wrench. and or 3/8" drive ratchet & 1/2" socket for head bolts and carb needle
A valve tool
A small flat file
5/16" wrench, and or socket
1/4" wrench, and or socket
3/8" wrench, and or socket
Pliers
Small adjustable wrench
A piston ring spreader it will help from breaking the piston rings
Flywheel wrench and holder and wrench to fit the end of the flywheel wrench
Flywheel puller or knocker and hammer
Rags or paper towels
And last but not least a box to put the parts in and a few paper or plastic cups for the small parts
One important reminder to all karters, it is up to the karter to make sure his or her kart and engine are legal. I do not know how may times I have heard I just bought this part or it came from the factory this way. Just because it came that way does not make it legal. Check with the tech man or race director to see if what you are running is legal. If there is any question in your mind that it may not be this check could keep you from a D.Q. later.