4-Cycle Tech Committee Robin Bradshaw-Chairman Fax- 336-731-3750 Bobby Gettys Fax-828-453-9891 Phone-828-453-7737 Ralph Helms Fax-704-455-1609 Ronnie Robinson Phone-410-835-2183 Fax-410-835-2710 Morgan Whitaker Fax-804-273-0784 Phone-804-273-0047 E-Mail-morgan@worldkarting.com   Champ Kart Committee Morgan Whitaker-Chairman Fax- 804-273-0784 Phone-804-273-0047 E-Mail-morgan@worldkarting.com Harrill Wiggins Lewis Myers

2-Cycle Tech Committee Steve Jacobsen Fax-630-871-1840 John Klutz Fax-336-731-3750 Tod Spaude Fax-352-793-4027 Pete Tyer Fax-601-924-9245 Lynn Haddock Fax-423-6984635 Angelo Sodano Fax-617-471-2332

Committee and Advisor Purpose: In all membership organizations, communication is the key element to ongoing success and continued growth. The purpose of these committees is to improve that line of communication. The path that line should take is from the member to the committee. At that point the committee will convey to the Board of Trustees and Executive Committee their findings and recommendations. This procedure will not only improve our existing operation but pave the way for good sound decisions and rulemaking for the future. WKA is also fortunate in that we have advisors in both the two-cycle and four-cycle divisions that have great insight and experience in karting. Their purpose is to assist and advise the WKA Board of Trustees and Executive Committee.

TM 15 - 252.1 TIRES [Add to the end of the rule] No Treatment / Doping of tires allowed.

TM 18 - 264.10 BRIGGS SUPER HEAVY [Change the rule to read] Overall minimum weight is 400lbs. Maximum kart weight is 200lbs.

TM 36 - 413.7 BRIGGS LIMITED LITE [Change to] Minimum weight 325 lbs.

TM 37 - 413.13 BRIGGS SUPER HEAVY [Change the rule to read] Overall minimum weight is 400lbs. Maximum kart weight is 200lbs.

TM 40 - 452.1 TIRES [Add to the end of the rule] No Treatment / Doping of tires allowed.

TM 42 - 463.12 BRIGGS SUPER HEAVY [Change the rule to read] Overall minimum weight is 400lbs. Maximum kart weight is 200lbs.

TM 63 - 611 COMER K-80 [Add to the beginning of note] This section covers stock Comer K-80 engines under 81cc. Engines must be single cylinder and utilize single, stock carburetor. Unless otherwise specified, all parts are to be of original manufacture and be stock in appearance.

TM 64 - 611.7 PISTON/CRANK/ROD [Add to the beginning of rule] Both rings must be in place.

TM 64 - 611.13 NON TECH ITEMS [Delete the following] and rings.

TM 96 - 801.2 GOLD CUP [Change the rule to read] For the National Gold Cup Series, from 4 Nationals, a competitor may count his 3 best Nationals OR 2 best Nationals and 1 Divisional Season finish.

TM 46 - 484.2 REAR BUMPER [Add to end of rule before note] Bumper must measure no less than 10 1/2” minimum from the backside of hoop A to the outer edge of both top and bottom rear bar of bumper. (See FIG. 476C)

TM 48 - 495.2 REAR BUMPER [Add to end of rule before note] Bumper must measure no less than 10 1/2” minimum from the backside of hoop A to the outer edge of both top and bottom rear bar of bumper. (See FIG. 487C)